[DML] Re: speedo, angle drive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: speedo, angle drive



Greg,

I recently replaced my angle drive too after it died coming home from a show 
in Indiana. I ordered a new one from PJ Grady. Rob suggested that I also 
change out the lower speedo cable as well. He said the new cables are 
shorter and have less tendency to twist causing speedo failure. I replaced 
this cable as well and have had nothing but smooth speedo operation since. 
You might need this new, shorter cable to eliminate that jerking motion you 
described in your speedo.

I believe you lube the cable and angle drive with ordinary lithium grease, 
but I could be wrong. Perhaps DMC Joe can shed some light on this.

Brian
VIN 1597




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated