[DML] Re: Service with a Frown
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Service with a Frown



At 07:09 AM 11/27/99 EST, you wrote:
>I believe you can make your own wrench to remove the oil plug from a length
>of 5/16 square stock. It worked real well for me.
>
reply:


There is also a socket wrench adaptor from 1/2" to 1/4" which uses a 5/16 square plug to connect the adaptor to the plugs. It is perfect for the oil drain plug. It's just the right depth and fits between the oil pan and the cross frame.

I usually jack up the rear end about 6 inches when draining the oil.

Lee




CAUTION Any individual or group discharging a nuclear device or weapon
inside Los Angeles city limits may be fined $500 - and/or 30 days in county jail.

It's the LAW!



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated