[DML] Re: So what are the 0-60 times?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: So what are the 0-60 times?



Here are the initial summary results and times using the Cartest2000
computer model. Available at cartest2000.com. 

Engine 0-60	1/4 mile	speed	top speed
V-8	6.2	14.7	94.4	143	4 speed auto
Supercharged 8.0	15.9	87.3	138	5 speed stick
Single
turbo	7.2	15.3	90.3	139	5 speed stick
Stock D	8.9	17.0	82.7	124	5 speed stick
Stock
automatic	9.2	16.8	81.0	123	3 speed automatic

Yes according to the model, the automatic stock is quicker than the
stick. Don't known why. Could be shifting times allowed in the program.


Note: this model assumes parabolic horsepower and torque curves based on
single peak outputs and rpms. My next step will be to imput individual
HP and torque curves and see what the results are.

I would have expected the supercharged car to be quicker in the 0-60
than the turbo. Since clearly in the dyno testing the turbo came on
later. 

The only assumption made in my input was HP and Torque loss for the
drive trains. The Sticks cars were 30 HP and 30 ft/lbs torque. This
was based on the wheel output compared to the listed engine HP. e. g. 

130 - 100 at wheel == 30 HP loss to drive train. 

The automatic cars were 40 HP and 40 ft/lb torque. again based on the
test results and list values.


Many Thankx to W. Wilson for recommending Cartest2000. It facilitated
these initial results. 

Dr. Bob




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated