[DML] Re: WARNING ! Removing door and quarter panel
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: WARNING ! Removing door and quarter panel



WARNING !

Correct me if I am wrong but I believe you are trying to describe the
procedures for removing a DeLorean gullwing door, if this is true you have
left out many details, some of which could cause serious injury to whoever
is attempting this procedure.

DMC Joe / DeLorean Services / <dmcjoe@xxxx>
Web Site: <http://www.deloreanservices.com>

----------
> From: CBL302@xxxx
> To: dmcnews@xxxxxxxxxxx
> Subject: [DML] Re: Removing door and quarter panel
> Date: Sunday, November 14, 1999 11:28 PM
> 
> Remove the T panel,to access the wiring harness,then support the door
fully open(using a 2x4)wedged tight between the door and the ground remove
the strut,then as you remove the bolts holding the door on, have
asstists,hold the door as all the hindge bolts are removed.NEVER remove or
work on a Delorean door without it being wedged up,so as not to come down
on you.The Delorean Q panel has what look like philips screws (they are not
philips screws)under the door weatherstrip and the rocker panel and under
the rear facia,and the rocker panel on the back of the Q panel,and of
course you have to remove the engine compartment rear louver. 
> 
> Claude
> 000570 
> 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated