[DML] Re: Removing door and quarter panel

[CBL302@xxxx]

Remove the T panel,to access the wiring harness,then support the door fully open(using a 2x4)wedged tight between the door and the ground remove the strut,then as you remove the bolts holding the door on, have asstists,hold the door as all the hindge bolts are removed.NEVER remove or work on a Delorean door without it being wedged up,so as not to come down on you.The Delorean Q panel has what look like philips screws (they are not philips screws)under the door weatherstrip and the rocker panel and under the rear facia,and the rocker panel on the back of the Q panel,and of course you have to remove the engine compartment rear louver. 

Claude
000570