I seam to remember some discussion about the LCD failure a
while (probably 2 years or so) back. You might want to search the
archives...If memory serves, there is a wire ribbon that gets pinched and can
cause this failure.
Can anyone else confirm this (again just going from a pretty
shaky memory)
Michael Babb
----- Original Message -----
Sent: Monday, October 04, 1999 1:05
AM
Subject: [DML] Electrical system,
ventilation, and radio questions from a newbie.
Finally, I ran into a problem because the radio seems to work, but the
little LCD display doesn't. Has anyone else experienced this before,
and if so what was the problem (loose/broken connection somewhere,
etc). It is the original Delorean Craig radio.
|
To address comments privately to the moderating team, please
address moderato-@xxxx
|