[DML] Re: FW: Door Latches
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: FW: Door Latches
- From: David Sontos <dsontos@xxxx>
- Date: Fri, 17 Sep 1999 23:23:42 -0400
Put some grease on the top of the pin and close the door. Open the door
and look where the grease was, can you see where the latch hit the pin?
The latch should be hitting the center of the pin. One of the pins in my
car had to be shimmed out 0.200", the latch wasn't even hitting the pin.
Dave Sontos
VIN 02573
Gus Schlachter wrote:
The
problem looks like the rear latch, since it will be halfway-latched when
the front latch is completely closed. I have tried adjusting the
striker pin as far out/up as it will go with no success. The driver's
door closes perfectly and easily.
Back to the Home of PROJECT VIXEN