> Paraversal@xxxx wrote: > > The previous owner of my DeLorean appearantly used steel wool to clean part > of the drivers-side gullwing, and it looks a little brown. I know what caused > this but what can I do to work out the rusty spots? Anything? Steel wool is ok if you are certain that it is stainless steel wool. Try using Scotch Brite and a restaurant grade stainless steel cleaner. This cleaner is abrasive so be careful not to rub using a circular motion, but go with the "grain" of the finish. Most of these cleaners also act as a sealer so that fingerprints don't "stick" as easily. A non-abrasive cleaner you might try is "CLR" ("C"alcium-"L"ime-"R"ust). It is available in most stores that carry a comprehensive stock of household cleaners. This is a highly corrosive cleaner so be sure to read the label carefully. You should try diluting it first with an equal amount of hot water. If that doesn't work try using it full strength taking appropriate precautions to protect yourself and other surfaces such as anything painted and upholstery. It is "guaranteed" to work. Happy cleaning! Ed Thompson (#6419 since 1982) Midlothian, VA ------------------------------------------------------------------------ To address comments privately to the moderating team, please address moderator@xxxx