Raymond, Is this problem evident with a "no load" condition. In other words, how does the steering behave with both front wheels off the ground. DMC Joe / DeLorean Services / <dmcjoe@xxxx> Web Site: <http://www.deloreanservices.com> ---------- > From: raynet@xxxx > To: dmcnews@xxxxxxxxxxx > Subject: [DML] Steering Woes from Heck > Date: Saturday, July 17, 1999 4:50 PM > > Ok I have run out of ideas on this one... > > I recently put in a new steering rack and lower U joint to take care of > a sloppy steering problem. Ever since then the steering seems to bind > up and get stuck going around. I've disconnected the joints from the > rack and find the rack to be tight with no binding so I know it must be > somewhere in the joints. To try to solve the problem I replaced the > bushing at the firewall thinking that would solve the problem but no > luck. I have soaked the joints in oil to make sure neither are stiff. > Steering column itself seems to be binding free. Any ideas?? > > Raymond McKay > Network Administrator > Funnybone Interactive > > > ------------------------------------------------------------------------ > To address comments privately to the moderating team, please address moderator@xxxx > ------------------------------------------------------------------------ To address comments privately to the moderating team, please address moderator@xxxx