[DML] Angle drive problems again!!??!!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Angle drive problems again!!??!!



Ok...I've tested the angle drive by taking a small screwdriver and inserting it into the hole that the speedo cable goes into.  When I spin the angle drive cable (that the small plastic cap goes on) it turns the screwdriver easily and dosen't skip a beat.  I thought my problem was the speedometer cable itself so I got another one from PJ Grady.  I installed it.  Then before I connected it to the angle drive, I turned it and the speedometer spins ok.  Then I connected it to the angle drive and it was really hard to turn from the angle drive cable (that the cap goes on)  I know the speedo cable isn't bad.  I know thatthe speedometer is turning from the cable.  I know that the angle drive works (until you hook up the speedo cable)  I know that the plastic cap is attached firmly to the spindle.  Could someone please tell me what I'm missing?  Any help would be greatly appreciated! 
 
 
Thanks in advance,
 
 
Duke
 

eGroups.com home: http://www.egroups.com/group/dmcnews
www.egroups.com - Simplifying group communications


Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated