[DML] Re: Centering the air meter plate
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Centering the air meter plate





What you found is what I would call "generic" information. It applies
broadly to the K Jetronic line. Unfortunatly these things were offered
in various "flavors" or versions. I do not think on the particular
version we have in our Deloreans you should be bending any springs.
BTW adjusting that nut does "bend" the spring a little. That is if
everything is assembled correctly. If you cannot get the plate to the
proper rest position if you send it out to someone they can probably
get it to work for a minimal expense. It certainly will not operate
properly as it appears in the picture. The air will get around it and
it cannot meter the air and fuel properly.
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, "Matt Spittle" <supermatty@xxxx> wrote:
> 
> 
> Couple of opinions here how to adjust the rest position of the air 
> metering plate.  Here's one more that says to bend the "spring."  
> 
> 








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated