[DML] Dye Tapping the timing Cover....Help :)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Dye Tapping the timing Cover....Help :)



Hi

I need to retap the lower AC belt / pulley arrangement, the threads 
on the lower 7mm hole are stripped and hence as i cant tighten this 
enough i have a slight weep from the blanking plate / gasket behind.

I have never retapped a hole and whilst i have purchased a new tap 
and dye set there are no instructions / advice on how to do this.?

Thinking of putting in a 8mm thread for a new bolt, will i need to 
redrill the hole or am i ok using the existing.......

Thanks All

Mike
#2001




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated