Just be careful - there are some boxed-in areas where you'll remove the epoxy (i.e. it will fall off the back side of the metal) but can't get anything back in there to re-coat it. Particularly the front frame right behind the rack. The only way in there is either to drill a hole in the center of the panel or remove and re-weld it. What you are seeing seems normal, mine was like that too. What are you going to replace the epoxy with? Dave S --- In dmcnews@xxxxxxxxxxxxxxx, "Matt" <supermatty@xxxx> wrote: > WOW! A heatgun really does wonders removing the epoxy from the > frame. Previously I had been using a drill with a wire brush > attachment but this is WAY better. Yes, you still have to scrape, > but it comes off like warm butter. It takes about 10 seconds with > the gun to warm the area sufficiently to start scraping but after > it's hot, moving to an adjacent area is very easy. > To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/