Yan, Coming off the bottom right terminal of the resistor coil should be about 9 to 12 volts going to the ( - ) side of the coil when cranking. If that isn't there then you will have no spark because there isn't enough for voltage for the coil to work with. Check that and let us know. John Hervey www.specialTauto.com -----Original Message----- From: delorean6584 [mailto:carburateur100gaz@xxxxxxx] Sent: Thursday, July 22, 2004 12:07 AM To: dmcnews@xxxxxxxxxxxxxxx Subject: [DML] engine wont runs my delorean refuse to start today...so i checked some points...the fuel is comming but there is no fire at all, i tried another bosch coil didnt work either, i put a spark plug wire and a spark plug directly on the coil and checked the fire, it does a spark when i put the key to on position and another one when i put it to the off position, but when cranking the engine it doesnt sparks... my best bet would be the resistor or ecu any hints of what to check and how thanks yan vin 6584 * Milla * To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/