Re: [DML] third brake light
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] third brake light



Two choices:
1. route the wires into the cabin electrical
compartment
2. run the wires into the fascia cavity

I chose the latter. I ran the cables under the right
rear quarter panel windows, around the air intake,
slipped between the body and the fascia (fused it
right there where it is accessible) and into the
fascia where I spliced into the brake wire on the
plug. Use heatsink to get good seals on the splices.

--- Hank <henry@xxxxxxxxxxxxx> wrote:
> 
> Getting ready for PF...
> 
> I'm going to install an LED light bar today as my
> third-brake/collision avoidance light.  What is the
> best (and/or easiest) place to wire this into the
> system? 
> 
> Thanks,
> -Hank



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated