Re: [DML] Re: Hard/No Starting - Solved!

["Elvis Nocita" <elvisnocita@xxxxxx>]

Have those 8mm wires a special or higher resistance ?

If yes - compare them to the original wires.
If they are the same - like no resistance - leave them on the car, they
should isolate better than the stock wires.

By the way - nice to read that those "high voltage" coils fail like I
thought.
Buy a brand name that has been used in millions of cars and you can be
sure that stuff is approved and works.

Nice boxes and powerful names don't guarantee for quality.

Elvis & 6548


>      Hey all, 
>                For those that were helping me with my no starting problem
> I'd
> like to send out a big thanks to them. I haven't been able to work on it
> for
> the last few days, been busy and have a sick animal to tend too. 
>         
>                 Anyway, got around to it today. I was convinced that it
> wasn't
> a vaccuum or fuel issue so I started with spark on someones suggestion.
> Turns out that the new MSD Blaster 2 that put on over the winter is either
> bad or my car just doesn't really like it. I put on the 20+ year original
> and it
> fired right up and ran perfect. Starts every time now. So now my question
> is
> when I put the msd coil on I also put on 8mm wires. Now that I'm back to
> the
> original coil would it still be ok to use the 8mm or should I go back to
> the original
> 7mm? What would the effects be with the new wires?  
> 
>                I guess I'm just gonna buy a new original bosch coil to put
> on. Thanks
> again to everyone that replied. You were all great.
> 
>                                 Jason #5903
> 

-- 
"Sie haben neue Mails!" - Die GMX Toolbar informiert Sie beim Surfen!
Jetzt aktivieren unter http://www.gmx.net/info




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/