[DML] Lowering Advice

[PRC1216@xxxxxxx]

Okay, I know that there have been many threads on this topic, but here it 
goes again.   If I were to buy a used set of front springs, cut them down 1.5 or 
2 inches with a Dremel, and put them back on the front of my car, would there 
be any unforseen problems?  Would cutting 1.5 inches off the spring lower the 
front of my car 1.5 inches, or should I cut more?   I just want my front end 
to be a little bit lower, which in my opinion makes the car look sleeker and 
sexier.   I plan on saving my original springs in case I want to return the car 
to stock height.   I don't want it too low, and I don't want to touch the rear 
end, because I think that looks fine the way that it is.   

If you want to email me directly, PRC1216(at)aol.com
Thanks,
Patrick
1880


[Non-text portions of this message have been removed]




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/