I never claimed you sold 7mm stainless bolts. Don't think anybody does. Fastenal still has access to 7mm stainless nuts however. My thought was to use your exhaust studs in lieu of bolts to hold down the coolant distribution pipe. I'll be buying 4 at Mid Atlantic for that very purpose on my own car. My water pump is currently held on by 8mm stainless studs and stainless lock nuts. I have no intention of drilling bolts out when time comes to replace it. Biggest threat of galling is turning the fastener too quickly. Over torquing can be a problem too, but speed driving is worse. BTW: my exhaust manifolds are currently held with the reverse of your setup: stainless nuts & washers on carbon studs. Don't anticipate any future problems changing those gaskets either (remainder of exhaust system has been converted to custom duals). Bill Robertson #5939 >--- In dmcnews@xxxxxxxxxxxxxxx, "PJ Grady" <rob@xxxx> wrote: > Bill, > > We don't currently have stainless 7mm Hex bolts available and never claimed > to. We do however offer an intake manifold bolt kit (#1IMBKIT...$24.65) that To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/