[DML] Re: Brake Lights not Working
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Brake Lights not Working



Don't forget to check out the tail light boards. Very common to have
intermittant connections at the rivets. A quick fix is to put tiny
screws and nuts through them. I think it is on dmcnews.com look under
the technical section. Carefully check the bulbs. They should be clean
and springy in the sockets. Reshape them if you have to so that the
spring holds them up against the pins and use a wire brush to clean
the socket, a plumber's wire brush for copper tubing works great. It
is also common to have a bad bulb that looks good. Remove it from the
socket and flick it with your finger. If you see the filiment wiggle
on 1 side then replace it. Also clean the point that the plug attaches
to the board.
David Teitelbaum
vin 10757



--- In dmcnews@xxxxxxxxxxxxxxx, "aaron_t_graham" <aaron_t_graham@xxxx>
wrote:
> Mine stopped working awhile ago.
> 
> For me, it turned out to be the brake light switch in front of the 





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated