[DMCForum] Re: Unused and unknown connectors.

["Wilhelm Starberg" <wilm@xxxxxxxxxxxx>]

Excellent, thanks Rick.

The previous owner has not used vacuum advance...strange.

I found a 'new' vacuum switch at the scrap today - I'll hopefully get 
it in this weekend.


-- 
Wilhelm S.
#10816





--- In DMCForum@xxxxxxxxxxxxxxx, "cruznmd" <racuti1@xxxx> wrote:
> Wilhelm,
> 
> Specifically,
> 
> #1 is for the automatic transmission kickdown switch. Out near the
> plug for the full-throttle microswitch you'll find another 
green/green
> black, square plug unused, also for the automatic transmission.
> 
> Of the other 3;
> 
> #1 is indeed for your frequency valve, the rubber booted one is for
> the vacuum solenoid as you surmised and the last one is a ground 
that
> is supposed to hook onto a clip on the passenger side (closest 
corner)
>  of your intake manifold.
> 
> I'll be honest; I have no idea how your engine is running with most 
of
> the important systems disconnected. :)
> 
> Welcome to our world. If you need more help, just email.
> 
> Rich A.
> #5335
> 
> --- In DMCForum@xxxxxxxxxxxxxxx, "Wilhelm Starberg" <wilm@xxxx> 
wrote:
> > Hi,
> > 
> > While searching for my vacuum solenoid, I found some unused 
connectors 
> > that would like to know the use of...
> > 
> > Here is a pic of the first unknown connector:
> > 
> > http://home.broadpark.no/~wstarber/pics/unknownplug1.jpg
> > 
> > It's a two pole, looks like the one to the fuel pump.
> > 
> > Here is a pic of 3 more:
> > 
> > http://home.broadpark.no/~wstarber/pics/unknownplug2.jpg
> > 
> > I have numbered the connectors, I believe con. 1 is for the
> > frequency valve? I Ohm'ed con. 2 and one of the pins has 0 Ohm to
> > one of the pins on the idle microswitch, so I guess this one is 
> > for the vacuum solenoid (wich might explain why a can't find the 
> > solenoid anywhere...).
> > Connector 3 I have no idea what is, it is a two pole.
> > 
> > Any help appreciated.
> > 
> > --
> > Wilhelm Starberg
> > #10816

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.