[DMCForum] Trailing arm cover studs

["Dave Stragand" <dave.stragand@xxxxxxxxxxxxxxx>]

Not satisfied with the studs they used for the trailing arm shields, I
fabricated these out of some metric studs and some of those little metal
brackets you hanging file folders from in an office drawer.  I showed them
to PJ Grady a while back, and I believe he is now making them out of
stainless.  My cost was about $1 to make them.  I put them in place with
polyurethane adhesive to seal the holes and hold them in place.

http://www.projectvixen.com/images/IM000025.JPG

-Dave


[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/SIG=12cjd8eas/M=267637.4116732.5333197.1261774/D=egro
upweb/S=1705126215:HM/EXP=1069476390/A=1853618/R=0/*http://www.netflix.com
/Default?mqso=60178338&partid=4116732> click here	
 
<http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egroupm
ail/S=:HM/A=1853618/rand=229082505> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

<<attachment: winmail.dat>>