>>Teflon good up to 450 degress, but not very compressible. Apparently impervious to anything you throw at it<< Yes, PTFE and FEP are inert but the durometers they typically come in are poor for dynamic sealing applications. I wouldn't use them for for static sealing in this case either. >>but am hoping diagnosis days are over.<< Somehow, I kinda doubt that. >something tells me my last set from plumbing supply house weren't Viton.< Gee, ya think? Viton isn't cheap, I have sheets of it that cost me plenty. Best to skip the plumbing supply houses when buying critical parts. Fwiw, I skip the vendors also. >My hard metal fuel lines don't lend themselves well to a pressure gauge.< Than change what is needed to port a gage into the control line. Pressure is the heart and soul of the K-Jet and will tell you more about whats going on than anything else. If it were my car I'd permanently engineer a port to do this. >>Oh, my CPR doesn't have the vacuum nipple you speak of. Is a stanchion right next to electrical connection just like DeLo, but I think that's a vent.<< That *is* the "nipple" I'm speaking of. It's not used on the D but it's used on lots of other CPRs for acceleration enchichment. I don't follow your comment about the breather. Since you've disconnected the vacuum line from the breather to your cold start tube I have no idea how you're scavenging your crankcase and valve train. Do you still have the hose from the breather to the air cleaner? I hope you're not doing it through there, thats not how it's supposed to work and is bad in many respects. Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=244522.3707890.4968055.1261774/D=egroupweb/S=170512 6215:HM/A=1595056/R=0/SIG=124p07ne0/*http://ashnin.com/clk/muryutaitakenat togyo?YH=3707890&yhad=1595056> Click Here! <http://us.adserver.yahoo.com/l?M=244522.3707890.4968055.1261774/D=egroupm ail/S=:HM/A=1595056/rand=859329234> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN