Mike, I have a steering wheel puller. Perhaps mine is more compatible (yes I realize you tried to get the most "universal" model). Hey, if all else fails, call Houston or PJ Grady. You buy enough stuff from them. They are usually very free with the tech assists. --- In DMCForum@xxxxxxxxxxxxxxx, "Marvin" <marv@xxxx> wrote: > sell!.......................................(LOL) > > " ....turn every job into an adventure..." It's sounds like you and I travel > the same roads! Whatever you do, Murphy's Law shows up and there is a > problem. I was changing a rad hose, broke the inlet and had to buy a new > radiator. > Marv. > # 17077 > marv@xxxx > > ----- Original Message ----- > From: "Cohee, Michael" <mcohee@xxxx> > To: <DMCForum@xxxxxxxxxxxxxxx> > Sent: Thursday, July 03, 2003 9:45 AM > Subject: [DMCForum] wiper switch surgery > > > > In my effort to turn every job into an adventure I need some advice on the > wiper switch....Mine broke off a few months ago and if you have ever seen th > inside there are some weird litle brass doohickys in there. I have 2 options > for the transplant....I have a donor wiper/turn signal unit be medi- vac'd in > today....The easiest way is to just take the 3 screws off the donor wiper > unit and reattach the unit to my existing one on the car and just reconnect > the wires....this I can do easily. The problem is on the metal bracket it > says DO NOT REMOVE 2 SCREWS. So has anyone unscrewed a wiper unit from the > metal bracket? It could be springloaded or have some other moving parts that > would come apart and the donor unit would be no good....the other option is > to take the wheel off and replace the whole thing. This does not seem too > bad and just means a little more work but involves taking the wheel off. I > just bought a wheel puller with 30 assorted bolt sizes and NONE of them will > work on the wheel...so the problem with this option is getting the ^%$#+ > wheel off.... > > > > so should I go for plan a or B? > > > > thanks > > Dr. Mike > > 2109 > > > > > > To unsubscribe from this group, send an email to: > > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > > > > > Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=244522.3512152.4794593.1261774/D=egroupweb/S=170512 6215:HM/A=1595054/R=0/SIG=124f8kfa7/*http://ashnin.com/clk/muryutaitakenat togyo?YH=3512152&yhad=1595054> Click Here! <http://us.adserver.yahoo.com/l?M=244522.3512152.4794593.1261774/D=egroupm ail/S=:HM/A=1595054/rand=664145600> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN