> On the left and right are what seems to be very badly > corroded screw heads, which I cannot turn. Any suggestions on how to > proceed?! I hope I'm not too late with this answer. I think that the corroded screws you are referring to are the ones sticking up through the fiberglass underbody. These rust when leaks in the roof wet the center console. I suggest soaking them with penetrating oil before removing the nuts. If these studs break or spin, you can't reach the back side to fix them without taking the body off the frame. Some people are able to reach around the back side of the instrument panel to remove/replace the mode switch. My hands aren't that small. I end up first removing the center console and then loosening the bracket (the one that holds all the controls & the radio). As Jan said earlier, I don't know of any other screws/fasteners in the area that could be holding the bracket down. Walt To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN