To remove the top black bezel, peel back the rubber door seal from the top of the door. It will reveal 3 screws on each side. To remove the sides, keep peeling until you reveal those screws as well. > -----Original Message----- > From: John Dore [mailto:dmcjohn@xxxxxxxxxxx] > Sent: Wednesday, December 04, 2002 8:05 PM > To: DMCForum@xxxxxxxxxxxxxxx > Subject: [DMCForum] removing windshield bezel? plus headliners... > > Hey Lads, where do I find the screws holding on the black windshield > bezel to the top of the windshield? Are they under the main section > of the headliners? Or am I blind? > If I do have to go take my headliners off (to fix my leaky roof if > you remember from a few weeks ago!), I'm going to recover the whole > roof in Black leather, hopefully it'll look good. Then I was > thinking I might stitch the edges with some silver thread... or > maybe that would look really tacky? Anybody else ever done this? > Over last summer I recovered my headliners with black material to > match my black leather interior, and the result looked good, but > could definitely look better... > Another headliners idea I had was to have DMC logo in big letters on > the center of each door section headliner, so that it could be seen > when the doors opened, is this too much??!! Walt I know you don't > like to advertise the DMC logo, but I'm the opposite! I have the SS > letters in my bumper, SS logos on my door sills, and am also > thinking of getting a custom carpet for the (vertical) back wall of > my storage shelf which would say, you guessed it, DMC! > OK I'll shut up now... > Thanks, > John, VIN 3810. > PS My DMC is in my garage for the winter so I can take my time > fixing the roof leak. > Also, I bought a set of Toby TABs yesterday and will fit them over > the next few weeks whenever I get a chance. Any advice on what to > look out for when doing this job would be very much appreciated! > > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN