[DMCForum] No power at 4000 RPM
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] No power at 4000 RPM



Recently I posted a message asking for ideas on what could be causing
the drop in power at full throttle once the engine started going past
4000 rpm.
 
I installed a gauge to measure fuel system pressures.
 
All reading were taken on a cold engine, 70 F ambient temperature.
 
Control Pressure = 2 bar
Primary Pressure = 4.9 bar
Rest Pressure = 2.9 bar
Rest Pressure after 10 minutes = 2.5 bar
 
Looking at my chart, it looks like primary pressure is at the bottom end
of the allowable checking pressure 4.9 to 5.5 bar.
I can set the primary pressure to the setting range of 5.1 to 5.3 bar.
 
My question is;
 
Will raising the primary pressure affect the Control Pressure?
 
Is there a way to adjust the Control Pressure?
 
How is it done?
 
Maintenance History
Major tune-up performed just before Nashville trip.
New coil last week.
New fuel filter 3 weeks ago.
Fuel pump suction strainer is clean.
Fuel suction pipe is rigid and has no leaks.
Air Filter is clean.
No signs of vacuum leaks.  All lines connected correctly.
 
So, what do you guy's think?
 
Scott Mueller
002981
RNDOLA
 


[Non-text portions of this message have been removed]


To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 



<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated