[DMCForum] Re: Steering column touching frame.

["Wilhelm Starberg" <wilm@xxxxxxxxxxxx>]

Ahh, that might be it...I need to seperate my frame from the
rest of the car, I'll have a look then - my frame is so 
rusted that I don't dare driving it.

This project is taking a bit more time than i expected :)

Thanks,
Wilhelm.



--- In DMCForum@xxxxxxxxxxxxxxx, Martin Gutkowski - DMUK 
<martin@xxxx> wrote:
> The RH bracket should retain the rack and prevent it turning. - 
check 
> the flange on the rack is slotted into the two prongs on the plate 
under 
> the RH bracket (the square one)
> 
> Martin
> 
> Wilhelm Starberg wrote:
> 
> > --- In DMCForum@xxxxxxxxxxxxxxx, "Walter Coe" <Whalt@xxxx> wrote:
> >  > It looks like your steering rack has slipped out of it's
> >  > mounts.
> > 
> > I loosened the clamps, twisted the rack into position,
> > and tightened the clamps - the column stayed clear of the
> > frame now, but as soon as i turned the steering wheel, the rack
> > twisted back into the position it was...
> > 
> > New bushings added to the list.
> > 
> > Thanks,
> > 
> > Wilhelm.
> > 
> >

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.