Re: [DMCForum] Re: Steering column touching frame.

[Martin Gutkowski - DMUK <martin@xxxxxxxxxxxxxx>]

The RH bracket should retain the rack and prevent it turning. - check 
the flange on the rack is slotted into the two prongs on the plate under 
the RH bracket (the square one)

Martin

Wilhelm Starberg wrote:

> --- In DMCForum@xxxxxxxxxxxxxxx, "Walter Coe" <Whalt@xxxx> wrote:
>  > It looks like your steering rack has slipped out of it's
>  > mounts.
> 
> I loosened the clamps, twisted the rack into position,
> and tightened the clamps - the column stayed clear of the
> frame now, but as soon as i turned the steering wheel, the rack
> twisted back into the position it was...
> 
> New bushings added to the list.
> 
> Thanks,
> 
> Wilhelm.
> 
>

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.