[DMCForum] Binnacle

[doctorDHD@xxxxxxx]

I used contact cement, which had the added effect of softening the vinyl  
also.
 
With a lot of patience I was able to mold the vinyl around the binnacle,  
around all the curves and inside the lip in the front.  I used masking tape  to 
hold the vinyl in place as in some places it wanted to "recede" The was  
minimal bunching up and this could have been eliminated with more patience,  elbow 
grease and masking tape.
 
The edges of the material are inside the binnacle where you don't see  them
 
The only visible seam was at the bottom center.
 
D² & 6530

Message:  7         
Date: Thu, 29 Jul 2004  18:07:12 -0000
From: "cruznmd"  <racuti1@xxxxxxxxxxxx>
Subject: Binnacle recovering: ATTN Dr.  DhD

I saw your post regarding the vinyl from JoAnn's.

What did  you adhere the material to the binnacle with? 3M? Hot glue?
Where did you  anchor the edges of the material?

Thanks,
Rich  A.





Thank  you,

Dave



"Just Say  NO, to the COUCH POTATO!"®


To see how go to _www.tvpedaler.com_ (http://www.tvpedaler.com/)   



[Non-text portions of this message have been removed]

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.