[doc] re bushing..again!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[doc] re bushing..again!



hi

finally manage to remove the lower end of the steering column, and 
have cleaned up the hole.

now when i try the bushing on the end of the shaft, is very tight.

is this normal?, or do i need to file the bushing abit!. (reluctant 
as i don't want to give any play when finished)

Bushing is from Martin.

when i push the splines back in, is it best to copper grease or 
something so that they'll come back out easy if i need to recorrect 
the wheel alignment?

thanx for any help

Steve
vin 1621






------------------------ Yahoo! Groups Sponsor --------------------~--> 
Home is just a click away.? Make Yahoo! your home page now.
http://us.click.yahoo.com/DHchtC/3FxNAA/yQLSAA/HliolB/TM
--------------------------------------------------------------------~-> 

DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/doc-uk/

<*> To unsubscribe from this group, send an email to:
    doc-uk-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated