Re: [doc] steering bushing, which method?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [doc] steering bushing, which method?



> Sort of. You'll probably manage to separate the lower half of the 
column 
> when you tug on it but don't fret, it'll jsut slide back on 
afterwards.


In fact when i did mine i found it a lot easier to get the lower 
half of the column back through the bush and into the upper u joint 
without all the extra weight of the rest of the column. 

The rest of the coloum just slides back over afterwards.

One more thing ...the retaining bolt on the upper u joint fits into 
the circular groove between the splines ie dont push the column 
right back into the upper u joint otherwise the bolt wont go back 
in . This ia another 'how too' im attempting to finish off :) Pics 
available if you need them thou.

Regards

Mike
#2001
403






DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/doc-uk/

<*> To unsubscribe from this group, send an email to:
    doc-uk-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated