Here is a link to an example posted on the Mid-State DeLorean Club http://www.midstatedmc.com/tech/aim.htm Not sure if you guys have different aiming requirements over there but these are pretty basic for here in the States. Shannon Y 16506 -------------------- Date: Mon, 06 Mar 2006 12:15:52 +0000 From: Martin Gutkowski - DMC Ltd <martin@xxxxxxxxxxxxxx> Subject: Re: Adjusting Headlights No figures, you need to do it in front of one of those measuring thingys the MOT places have. Or point your everyday car at the wall and mark the beam pattern on the wall and duplicate with the DeLorean Martin Phil Peters wrote: >Hi guys, > >I'll be re-fitting my side/headlights later this week. I took the headlight "buckets" out too so I'm wondering what the measurements are for setting the adjustment/alignment? Is it in the workshop manual? I haven't touched the main beams, just the side/dipped beams. > >Any help would be bonza. Cheeers, __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com DOC UK Website: www.deloreans.co.uk Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx ** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/doc-uk/ <*> To unsubscribe from this group, send an email to: doc-uk-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/