RE: [doc] Frenchy's sick again... - a little more...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [doc] Frenchy's sick again... - a little more...
- From: "Chris Parnham" <secretary@xxxxxxxxxxxxxxx>
- Date: Tue, 14 Feb 2006 20:31:34 -0000
Matt, I assume you have put extra fuel in it? You could remove one the
large pipes off the metering head and should have a flood of fuel come
out when the ignition is on. If not the fuel relay or fuel pump could
have packed up.
Haven't you got a local friend who is a good mechanic? You need to
diagnose what the problem is....... fuel or sparks...its one or the
other.
Best regards
Chris Parnham
DOC 2
RHD vin 12173 "Gully"
BTTF vin 20049 "Backy"
-----Original Message-----
From: doc-uk@xxxxxxxxxxxxxxx [mailto:doc-uk@xxxxxxxxxxxxxxx] On Behalf
Of Mat Clarke
Sent: 14 February 2006 17:35
To: doc-uk@xxxxxxxxxxxxxxx
Subject: [doc] Frenchy's sick again... - a little more...
Due to normal procedures concerning the 14th Feb, I didn't have the
time to go vey deeply at all into Frenchy's problem.
The only things I did find out are that she won't start at all now!!
and the ballast resistor tests the correct resistance.
Martin, I will be madly recrimping...too many spade connectors in
this car!!
Questions:-
1. Are you supposed to be able to hear the fuel pump at any stage
(just wanna quick heads up that it's on!)
2. What's that relay on the wall of the engine compartment, behind
the a/c conpressor?
3. How does one test relays ie..the RPM/fuel relay?
Many thanks....
Mat Clarke
--- In doc-uk@xxxxxxxxxxxxxxx, "Mat Clarke" <matclarke@...> wrote:
>
> You're the font of all knowlege....thanks.
>
> Will let you know how it goes....
> While I'm in there I'll probably put that low pressure switch in
(at
> last!)
>
> Mats
>
>
>
> --- In doc-uk@xxxxxxxxxxxxxxx, Martin Gutkowski - DMC Ltd
> <martin@> wrote:
> >
> > ***allarm bells*** Coil connections mate. I've followed a car
that
> > backfired spectacularly, then cut out and it was exactly that.
> >
> > Don't just re-crimp the spade connectors, replace them with
> eyelets and
> > screw them directly onto the coil's connections.
> >
> > Martin
> >
> > Mat Clarke wrote:
> >
> > >Thanks everyone for your help....
> > >I have a few hours spare tomorrow, so will go through it all...
> > >
> > >Nick, yes, electrically fine - it's as if the fuel has run out,
> > >and I heard it backfire at one point during one of its
> struggling,
> > >but quick cutouts....
> > >
> > >Cheers,
> > >Mat Clarke
> > >#3866
> > >DOC 100
> > >
> > >
> > >
> >
>
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed
public and may be printed in the club magazine **
Yahoo! Groups Links
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
SPONSORED LINKS
YAHOO! GROUPS LINKS
Back to the Home of PROJECT VIXEN