Re: [doc] Re: K-Jet fuel pressure gauge kit
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [doc] Re: K-Jet fuel pressure gauge kit
- From: Martin Gutkowski <martin@xxxxxxxxxxxxxx>
- Date: Wed, 12 Oct 2005 01:09:06 +0100
Hi Steve
I still think it's CPR or idlespeed ECU related, but you're welcome to
have a go. You can still pay via Paypal to dmuk@xxxxxxxxxxxxxx for the
moment. The pressure kit will show you all the pressures at the metering
head and allow you to watch them while it's running.
Best Wishes
Martin
blackaddertoo wrote:
> Hi Martin
>
> i'll have to order one as i am guessing a bit as to the problem.
>
> in theory i should have good running/rest pressure but she runs for
> 30 secs then chugs and stalls.
> am comming to think it could be injectors as would it run initially
> on cold start valve fuel and then off the injectors, but if
> rusty/blocked then could this be the problem?.
>
> would the pressure test kit point me in the right direction, ie if
> the injectors are receiving the fuel at correct pressure, then it is
> either the injectors themselves, electrical (but i don't think this
> is it) or vacuum but can't find any obvious leaks.
>
> do i just pay through DMUK? or now LTD.
>
> regards
>
> Steve
>
>
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
YAHOO! GROUPS LINKS
Back to the Home of PROJECT VIXEN