Re: [doc] What is the most common air con failure point?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [doc] What is the most common air con failure point?
- From: "Phill Wright" <psw@xxxxxxxx>
- Date: Fri, 19 Aug 2005 00:28:33 -0000
Ditto - (same guy) - pressurised system with nitrogen I think it was,
up to 200psi and went everywhere with a sniffer - then pumped out the
test gas before refilling with isceon 49 and mineral oil (the mineral
oil he uses is flourescent green, so I presume that doubles as the
dye as well?? ).
PhillW
6772
--- In doc-uk@xxxxxxxxxxxxxxx, "Richard" <dickyh11@xxxx> wrote:
> The chap who came to do my air con pumped in some other gas, and
used a
> sniffer probe to detect the leaks
>
> Rich Hutchinson
> DOC 365 VIN 1274
>
> > -----Original Message-----
> > From: doc-uk@xxxxxxxxxxxxxxx [mailto:doc-uk@xxxxxxxxxxxxxxx] On
Behalf
> Of
> > John Chapelhow
> > Sent: 17 August 2005 21:37
> > To: doc-uk@xxxxxxxxxxxxxxx
> > Subject: Re: [doc] What is the most common air con failure point?
> >
> > Alas, no dye. The 'short test' worked fine, there were no audible
> leaks
> > (the lack of dye was obviously a major oversight) are there other
ways
> > to check?
> >
> > :-(
> >
> > John
> >
> >
>
>
>
>
>
> ___________________________________________________________
> Yahoo! Messenger - NEW crystal clear PC to PC calling worldwide
with voicemail http://uk.messenger.yahoo.com
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
YAHOO! GROUPS LINKS
Back to the Home of PROJECT VIXEN