Re: [doc] sheered bolts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [doc] sheered bolts



Thanks for the feedback everyone.

- I will find a machine shop and have some stainless threads 'inserted' into
the original locations along the spoiler and then use stainess nuts.
- The grill will have matching steel threads applied, it will be repainted
after prepping and then copper grease will be applied to the threads with
stainless nuts.

The cowling is held in place by 4x threaded bolts that are screwed into
rivnuts.  I have found one that is loose enough for the washer to twidle but
cannot be undone as the rivnut must be turning too.  What would be the best
way forward?

Thanks in advance

Chris H
vin5255



DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **




YAHOO! GROUPS LINKS






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated