[doc] Re: Clutch Bleeder....
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[doc] Re: Clutch Bleeder....



Shame i cant spell thou....its still early in my defence :)

--- In doc-uk@xxxxxxxxxxxxxxx, "Mike Bosworth" <mike.bosworth@xxxx>
wrote:
> Hi all thought this link from the DML was a great idea for those
of
> you who have the manual  and about time too:)
>
> Looking froward to seeing you all on Monday ....hope the waeter
> holds up :)
>
> Regards
>
> Mike
> 403/#2001
>
>
>
> Group,
> As you know it has been discussed several time about how hard it
is
> to
> get to and bleed the clutch fluid through the slave cylinder.
> Well it's done, The unit has been built tested and parts ordered
and
> will be ready to ship in about 10 days. I am making them with an
> industrial grade valve, Stainless Steel hose with Teflon inner
liner
> and a modified bleeder screw that screws into the slave cylinder.
> Take out the old bleeder screw and screw in the new one and tighten
> with the nut. No special tools and leave it installed.
> If you have any question, feel free to call. If it's ordered with
the
> clutch kit you can take off $5.00.
> 972-564-9321
> John Hervey
>
> http://www.specialtauto.com/delorean-parts/clutch-transmission.html





DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **




Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated