Re: [doc] stuck caliper bolt
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [doc] stuck caliper bolt




Hi Richard

i'n not sure if rusted in place, just will not budge.

tried another 3/8 drive and sheared it off!!!

bought yet another, plus a mini butane torch (pen size).

the bolt is the one at the top of the caliper, accessed by
either a spanner above it, or a hole in the carrier but not big
enough to get a 1/2 inch drive on properly.

i've drilled a hole through theold disc to try and get access to the
thread side of the bolt but can't see it.

going to try tomorrow to heat the bolt head and try the socket +
extension bars, (about 3 foot of extension!)

i think soon the bolt head will give way, then the real problems
will start!

just want her on the road as have been working since last september
(on and off).

thanx again

regards

Steve
doc 370
vin 1621





--- In doc-uk@xxxxxxxxxxxxxxx, "Kevin Milliken"
<kevin.milliken@xxxx> wrote:
> Hi Richard
>
> Is the bolt rusted in place?
>
> Kevin #5959
>   -----Original Message-----
>   From: doc-uk@xxxxxxxxxxxxxxx [mailto:doc-uk@xxxxxxxxxxxxxxx]On
Behalf Of
> Richard Hanlon
>   Sent: 25 April 2005 09:20
>   To: doc-uk@xxxxxxxxxxxxxxx
>   Subject: RE: [doc] stuck caliper bolt
>
>
>   Sounds pretty tough!
>
>   The heat shouldn't really be a problem so long as you're gentle
with it.
>   Heat with one hand and keep trying the spanner with the other,
so you
> don't
>   end up getting it any hotter then you need to...
>
>   >From: "blackaddertoo" <blackaddertoo@xxxx>
>   >Reply-To: doc-uk@xxxxxxxxxxxxxxx
>   >To: doc-uk@xxxxxxxxxxxxxxx
>   >Subject: [doc] stuck caliper bolt
>   >Date: Sat, 23 Apr 2005 02:30:51 -0000
>   >
>   >
>   >Hi
>   >
>   >has anyone had this problem?
>   >
>   >trying to sort rear brakes. one bolt is stuck.
>   >
>   >tried sockets, spanner, hit spanner with hammer.
>   >release oil. hammer caliper (with one bolt out)
>   >
>   >i have actually bent my socket extension with the torque.
>   >
>   >my last resort is heat, but i don't fancy doing this!
>   >as the carrier is aluminium i think.
>   >
>   >regards
>   >
>   >Steve doc 370
>   >
>   >
>   >
>
>
>
>
>   DOC UK Website: www.deloreans.co.uk
>   Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
>   ** Unless otherwise stated, all messages posted to the group are
assumed
> public and may be printed in the club magazine **
>
>
>
> -------------------------------------------------------------------
---------
> --
>   Yahoo! Groups Links
>
>     a.. To visit your group on the web, go to:
>     http://groups.yahoo.com/group/doc-uk/
>
>     b.. To unsubscribe from this group, send an email to:
>     doc-uk-unsubscribe@xxxxxxxxxxxxxxx
>
>     c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms
of Service.
>
>
>
> [Non-text portions of this message have been removed]





DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **




Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated