Re: [doc] DPNW Door Actuator Upgrade Wiring
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [doc] DPNW Door Actuator Upgrade Wiring



If it works on the original lock module, it'll work with a Lockzilla,
unless the lockzilla is poorly designed (needle, needle :-)

Just a quick plug - our re-wound solenoids work a treat, and are cheaper
than Toby's kit, and keeps things original.

We re-wind them with a slightly heavier gauge wire rated to
170-something degrees C so it will take a lot to burn one out. Must not
be used with a stock lock module.

Martin

Alistair McCann wrote:

> Hi all
>
> Has anyone fitted this to their car??
>
> Does the wiring change if you have the zilla lock module instead of
> the original module??
>
> Alistair McCann
> DOC 25
> VIN# PILOT25
>
> [Non-text portions of this message have been removed]
>



DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **




Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated