Re: [doc] Brake master cylinder removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [doc] Brake master cylinder removal
- From: "jamesrguk" <James_rg@xxxxxxxxxxx>
- Date: Sun, 13 Mar 2005 21:26:05 -0000
Chesk around the fuel tank cover (under the car) mine looked fine,
and then when I took the cover off there was flaky expoxy and rust
all along the inside edge of the chassis, next to the tank.
if you have a leak it tends to run down the side of the fuel tank
onto the chassis where you can't see it.
I would definately take a look, its only a 10 minute job to remove
the cover under the car.
James
--- In doc-uk@xxxxxxxxxxxxxxx, "Paul" <aqzj73@xxxx> wrote:
> Thanks Nick. It looks like its already softened some of it
already :^(
>
> My own fault really. Ive tried to give 0981 a run round the block
once a week
> until the delivery of my parts came. The only problem was, I was
having to use a
> full bottle of DOT4 every time I took her out. Must have gone
through 10 bottles easy !
> Thats a lot of brake fluid running along the chasis!
>
> Paul.
> DOC298
> Vin#0981
>
> ----- Original Message -----
> From: nick12dmc
> To: doc-uk@xxxxxxxxxxxxxxx
> Sent: Sunday, March 13, 2005 4:15 PM
> Subject: Re: [doc] Brake master cylinder removal
>
>
>
> Hi Paul,
> I would just wash the area well and then check the epoxy
> has not softened.
> Regards
> Nick H
> --- In doc-uk@xxxxxxxxxxxxxxx, "Paul" <aqzj73@xxxx> wrote:
> > EEEEeeek! My car has been leaking brake fluid for months. Does
this
> mean ill have to check all the epoxy seals
> > on the underside of my car? (Obviously after ive fitted my
new
> master cylinder!)
> >
> > Paul Birks
> > DOC298
> > Vin#0981
> > ----- Original Message -----
> > From: Thomas Mc Auley
> > To: doc-uk@xxxxxxxxxxxxxxx
> > Sent: Sunday, March 13, 2005 10:51 AM
> > Subject: [doc] Brake master cylinder removal
> >
> >
> > Hey guys,
> > Any tips on removing the brake master cylinder? The manual
is a
> bit vague. I dont want to spill any fluid on the chassis if that
is
> possible, as I hear the epoxy doesnt like it!
> >
> > Thanks
> > Thomas
> > Vin 4087
> >
> >
> >
> > Send instant messages to your online friends
> http://uk.messenger.yahoo.com
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > DOC UK Website: www.deloreans.co.uk
> > Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> > ** Unless otherwise stated, all messages posted to the group
are
> assumed public and may be printed in the club magazine **
> >
> >
> > Yahoo! Groups Sponsor
> > ADVERTISEMENT
> >
> >
> >
> >
> >
> > ---------------------------------------------------------------
-----
> ----------
> > Yahoo! Groups Links
> >
> > a.. To visit your group on the web, go to:
> > http://groups.yahoo.com/group/doc-uk/
> >
> > b.. To unsubscribe from this group, send an email to:
> > doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> >
> > c.. Your use of Yahoo! Groups is subject to the Yahoo!
Terms of
> Service.
> >
> >
> >
> > [Non-text portions of this message have been removed]
>
>
>
>
>
> DOC UK Website: www.deloreans.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to the group are
assumed public and may be printed in the club magazine **
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
>
> -------------------------------------------------------------------
-----------
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
> http://groups.yahoo.com/group/doc-uk/
>
> b.. To unsubscribe from this group, send an email to:
> doc-uk-unsubscribe@xxxxxxxxxxxxxxx
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms
of Service.
>
>
>
> [Non-text portions of this message have been removed]
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
Yahoo! Groups Sponsor |
ADVERTISEMENT
| |
|
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN