RE: [doc] Re: New Stainless Ex. Sys.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [doc] Re: New Stainless Ex. Sys.
- From: "Chris Parnham" <chrisparnham1@xxxxxxxxxxxx>
- Date: Mon, 31 Jan 2005 22:45:18 -0000
James,
I see the 5 orders being a potential problem.
It was basically the same with the other company, who have sold a lot
more than 5 by now. It's all about covering the cost of making the jigs.
I'm not sure how much demand there is at present.
I think I'd be happier getting them to fit the first few, just in case
they need tweaking. I suspect we may be better off sticking to our
current manufacturer, they seem to have the job sorted.
They certainly could be fitted locally, but it would need a top notch
crew to avoid snapping off the 7mm studs, very easily done if your heavy
handed or inexperienced.
Best regards
Chris Parnham
DOC 2
RHD vin 5638
BTTF vin 20049
-----Original Message-----
From: jamesrguk [mailto:James_rg@xxxxxxxxxxx]
Sent: 31 January 2005 21:28
To: doc-uk@xxxxxxxxxxxxxxx
Subject: [doc] Re: New Stainless Ex. Sys.
Chris,
Intersting to hear that there may be an alternative, a new free-flow
exhause has always been on my wish list.
To get a really good price on this someone needs to guarantee them
an order of say 5 units, paid up front with some reddies.
Do they actually fit the finished exhaust system as well?
Unfortunately I'm daaaan saaafff in Essex so Nottingham is not too
convenient. I know some semi-pro chavs who could probably knock em
up for less doh ray me.
I suppose you could have them made at one place and have them fitted
locally, would a local garage take on an exhaust fit on a DeLorean?
I guess they would.
James
--- In doc-uk@xxxxxxxxxxxxxxx, "Chris Parnham" <chrisparnham1@xxxx>
wrote:
> I have been contacted by a new Stainless steel exhaust
manufacturer,
> near Nottingham (who I have used in the past) who think they can
produce
> a stainless system similar to the current one, for less money.
>
> Tony visited my house and looked at the current systems on my cars.
>
> They would need a car to "play with", to fine tune the product and
> price, any volunteers?
>
> Contact Tony Bayard on 0115 938 2241. www.pdgough.com
>
> Best regards
> Chris Parnham
> DOC 2
> RHD vin 5638
> BTTF vin 20049
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed
public and may be printed in the club magazine **
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/doc-uk/
* To unsubscribe from this group, send an email to:
doc-uk-unsubscribe@xxxxxxxxxxxxxxx
<mailto:doc-uk-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
<http://docs.yahoo.com/info/terms/> Service.
[Non-text portions of this message have been removed]
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN