Re: [doc] HID conversion
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [doc] HID conversion



John you need to re-wire the plugs. It helps to have a small flat
screwdriver to prise the plugs from the plastic socket.

IN THE CAR'S PERSPECTIVE.

Black to the LEFT
Red/Blue to the TOP
White/Blue to the RIGHT

Martin


John Tien wrote:

> How about if i get the HID kit from Hong Kong??
>
> BTW, I have changed my original low beam to H4 (high
> beam remains original). I blew the fuse when I first
> tested the H4 low beam... then I replaced the fuse,
> and tried again...
>
> When i turn the low beam on the low beam turns on, but
> the high beam turns on as well (very dim though)
>
> When I turn the high beam on (control stick push
> forward) the high beam turns on together with the low
> beam, but the low beam gets dimmer
>
> But the funny things is, when I turn the high beam on
> during low beam mode (using the control stick pulled
> backward) both headlights turns on with full
> brightness...
>
> Did I mess up the wiring somewhere when I first blew
> the fuse?? Or is it simply the H4 bulb not suitable
> for the low beam?? I got them from the previous owner.
>
> I notice that the H4 is similar brightness to the
> original highbeam... somehow. How do you tell whether
> a headlight bulb is high beam or low beam version??
>
> Any help will be highly appriciated!!
>
> Many Thanks,
> John




DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **




Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated