Re: [doc] Cold start valve
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [doc] Cold start valve
- From: "Mark" <mark@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Mon, 17 Jan 2005 17:57:01 -0000
Hi Alistair,
Just in case it is the cold start injector, as it was on my car the bosch
part number is 0 280 170 400.
They're quite expensive retail £76.76. But if you speak to my friend Ken at
KMI on 0207 385 7138 and say your from the DOC club he will give you full
trade discount. If you have any fuel injection problems, he is the man to
speak to. He specialises in K jet systems.
A few years ago Brian Hamilton had quite a few problems with his, which his
garage struggled on and sent the whole engine fuel injection system over,
metering head, warm up reg, injectors, the pipes, the lot.
Ken stuck it on his diag system, cleaned the metering head, warm up reg &
replaced the injectors. Set it all up and sent it back for less than £300
including postage. Brian fitted it back on, tested the emissions and it was
spot on. Runs like a dream.
If you need, I have the full part number list and including some updated, of
all bosch parts fitted to the Delorean.
Hope this is of help
Mark
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN