Re: [doc] Erratic
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [doc] Erratic
- From: Martin Gutkowski <webmaster@xxxx>
- Date: Mon, 03 Nov 2003 19:18:21 +0000
Hi Nick
I have both the Renault PRV manual and the Renault K-Jetronic manual.
The latter of which states that a lambda equipped system should be tuned
to round 1.0%. Are we talking across purposes here? You are talking
about sampling the gas upstream of the cat, aren't you? Without a cat,
0.3% at the exhuast pipe will be far far too lean, and should be set to
1.0% or 1.5% if you want to lose the lambda system and gain some power.
I've set up a lot of DeLorean engines.
Martin
Nick Tomlinson wrote:
If you adjust the mixture so that when the lambda
sensor is plugged in it reads 0.3%, it'll be a tough car to start on a
cold morning, and you'll lose a lot of power.
Nick - Not true, you set the base system to 1.0-1.3% (as per my Bosch manual), the Lambda system will reduce this value and the cat will do the rest. I'm sure I have uploaded the Bosch K-Lambda system on this newsgroup.
Back to the Home of PROJECT VIXEN