Sorry Stian, It looks too technical for me. Regards Chris -----Original Message----- From: Stian Birkeland [mailto:delorean@xxxx] Sent: 12 October 2003 01:24 To: doc-uk@xxxxxxxxxxxxxxx Subject: Re: [doc] Minimum offset for rims? It's kind of hard to explain, Chris. If you look at: www.tyres-sold-online.co.uk/online_mechanic.htm and then scroll down to where the headline says "Wheel Offsets" and read from there, then maybe you or someone else can help me get the info I need. I have never found out the minimum offset info for the DeLorean's rims/tyres. In my registration document, there are still two open boxes. One of them says "Min. rim offset front", the other one says "Min. rim offset rear". There are supposed to be numbers in those two boxes, and the numbers are supposed to be stated in "mm" (millimetres). I'd like to fill out this info, so that the registration document gets more completed than it is now. Since the DeLorean was never type- approved in Europe, registration documents (at least for the DeLoreans over here in Norway) vary a lot. It's not a big deal, but many would like to get a common "standard" registration document for the car. That way import and registration for future owners would be much more easier. As it is now, each new owner when registering the car for the first time has to "convince" and sometimes have to find documents to show to their registration authority about the DeLorean's specs, and esp. info that are not contained in the import papers. It goes without saying that it is difficult to obtain the technical info since the factory closed 20 years ago... Best wishes Stian Birkeland Norway VIN # 06759 --- In doc-uk@xxxxxxxxxxxxxxx, "Chris Parnham" <chrisparnham1@xxxx> wrote: > Stian...I'm not sure what you are after. can you be more specific? > > Regards > > Chris > > > -----Original Message----- > From: Stian Birkeland [mailto:delorean@xxxx] > Sent: 11 October 2003 17:50 > To: DOC UK > Cc: dmcnews@xxxxxxxxxxxxxxx > Subject: [doc] Minimum offset for rims? > > Since I haven't got any replies yet, I'm posting it again. > > Please, can anyone tell me what the minimum offset is for the front and rear > rims? > I need the info to complete the registration document. > > Best wishes > Stian Birkeland > Norway > VIN # 06759 > > [Non-text portions of this message have been removed] > > > > DOC UK Website: www.delorean.co.uk > Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx > ** Unless otherwise stated, all messages posted to the group are assumed > public and may be printed in the club magazine ** > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ DOC UK Website: www.delorean.co.uk Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx ** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/