Re: Electrical Gremlins, PARTIAL SOLUTION !!!!!

["jchapelhow" <chapelhow@xxxx>]

Cheers Martin.

I have removed the duct, and can now see where the bundle goes (sort 
of). There isn't any obvious way to attach it but the edge looks like 
glue has been used in the past :-(

What's the story with the thick brown cable going to the service 
counter. Can this be reomved temporarily ? It is just a case of 
unscrewing it or will anything be set/reset be doing so?

John Chapelhow

DOC 19 : 'Boeing' 0737



--- In doc-uk@xxxxxxxxxxxxxxx, Martin Gutkowski <webmaster@xxxx> 
wrote:
> Well, you *can* put it in with them in place, it's just difficult, 
and 
> made doubly hard by the fact that you didin't see it in place to 
start 
> with. The duct can come out with the removal of two screws and the 
> little bracket that holds it - suggest trying that first, and don't 
> worry about the column
> 
> Martin
> 
> jchapelhow wrote:
> 
> >I can't drive the car to test it further without attaching the 
unit 
> >somewhere else, are there any ways/places to jury rig it with 
cable 
> >ties? Removing steering column/heating duct is something for the 
> >experts....
> >
> > 
> >