RE: [doc] Water temp switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [doc] Water temp switch



Next big meeting is the November NEC, but only 4 or 5 cars on the stand,
after that, next year! So Don't miss this one!

Dave new temp switches come on a few degree's sooner than the regular ones,
improving the cooling, both Dave and I like them. But they are a different
size and the water probe is bigger, enabling the switch to be turned through
180 degrees with out any danger of air locking around the probe, so that the
wires come in from the top. We have both operated like that for the last two
years, so PLEASE don't tell me why it won't work Martin, because it does.

The only switch related problem I have had is when the wire fell off on PMT,
this caused the temperature to climb ( un-noticed by me) causing the car to
boil and blow up the header tank. It would not have happened if I'd got a
new Dave switch fitted.

The only problem is a slightly different method if holding the switch is
needed, hence the cable tie.

I shall be very disappointed if you can't make it Jorden, but its your
decision.

CP

-----Original Message-----
From: Jordan Morris [mailto:jordan@xxxx]
Sent: 09 August 2003 20:41
To: doc-uk@xxxxxxxxxxxxxxx
Subject: Re: [doc] Water temp switch

Is that a safe solution? Just thinking about the heat produced.

Afraid I can't make it tomorrow. I wasn't sure weater or not she'd pass so
I made other plans. When's the next meeting?

Jordan
----- Original Message -----
From: Chris Parnham
To: doc-uk@xxxxxxxxxxxxxxx
Sent: Saturday, August 09, 2003 4:45 PM
Subject: RE: [doc] Water temp switch


I put a cable tie around it..........Meeting tomorrow?

Chris Parnham

-----Original Message-----
From: Jordan Morris [mailto:deloreanjordan@xxxx]
Sent: 09 August 2003 11:38
To: doc-uk@xxxxxxxxxxxxxxx
Subject: [doc] Water temp switch

Can anybody help with this little problem. I bought a new water temp
switch (the one that controls the cooling cans) from Dave and I've
just tried to fit it. The problem is the old switch is held in by a
clip and the new one is quite a lot longer and the terminals are at
right angles so the clip wont fit. How do you get the switch to fit?

Thanks,

Jordan.

P.S. KD just passed her MOT so I can strat to bring her to the meets
and events now!! :)



DOC UK Website: www.delorean.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed
public and may be printed in the club magazine **

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Yahoo! Groups Sponsor
ADVERTISEMENT




DOC UK Website: www.delorean.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed
public and may be printed in the club magazine **

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



DOC UK Website: www.delorean.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed
public and may be printed in the club magazine **

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated