Re: [DML] Re: Warm-up problems (spark advance solenoid)

["Paul Salsbury" <paul.salsbury@xxxx>]

Now you've got me hooked, I've always struggled to get an idle I'm happy
with, and have settled for 1000rpm after trying many different options.

Whilst playing and adjusting last weekend I was checking all my vacuum
connection and definitely remember that there was strong suction on the
vacuum advance pipe when I disconnected it. car was running sat on the
drive!

What are all the possibilities this could be and will it solve my
problems???

Cheers

Paul
#6463
http://www.paul.salsbury.btinternet.co.uk

----- Original Message -----
From: "content22207" <brobertson@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Wednesday, May 14, 2003 2:20 PM
Subject: [DML] Re: Warm-up problems (spark advance solenoid)


> Pull hose off spark advance diaphragm (attached to side of
> distributor) and feel for vacuum at idle. If it's there, something's
> wrong. Could be cut off solenoid or idle microswitch.
>
> Bill Robertson
> #5939
>
> >--- In dmcnews@xxxxxxxxxxxxxxx, billsfanmd@xxxx wrote:
> > I hear people talk about the spark advance solenoid located by the
> > distributor...Looks like alittle flying saucer :-) Is there a way to
> check to
> > see if it is bad? mine has the vaccum lines on it and the electrical
> plug but
> > just wondered the failure rate and symptoms? This does not seem to
> be a part
> > you would normally replace on a tune-up.
> >
> > Mike C
> > 2109
> >
> >
> > [Non-text portions of this message have been removed]
>
>
>
> To address comments privately to the moderating team, please address:
> moderators@xxxx
>
> For more info on the list, tech articles, cars for sale see
www.dmcnews.com
>
> To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>