Re: Angle drive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Angle drive



> Just wondering.. does anyone coming to Bath have the
> right sized socket to remove my angle drive from the hub?

Unfortunately I've had to take mine off about 5 or 6 times.
If yours is the original configuartion (I've seen different
setups!) the nut is 32mm.

If you take the tierod off of the knuckle, you can turn the 
knuckle allmost 90 degrees to the left, this makes
removing the nut (and putting force onto the wrench)
MUCH, MUCH easier...

Hope this helps,

Jan van de Wouw
Thinking Different... Using a Mac...
Living the Dream... Driving a DeLorean...

DMC-12 "Dagger" since Sep. 2000
100NX "Saphire" since Nov. 2002
--------------------------------





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated