RE: [doc] Speedo... bits
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [doc] Speedo... bits



Dan,

They are readily available, but you may wish to try a fix I have seen...you
get a small piece of aluminium, file/ cut a small square hole in it and self
tap or epoxy it to the inside of your existing cap. That was how the one Ian
Foster sent me was done.
I think Dave may have some new one's and I'm pretty sure Wingrey can supply
one.

Chris P


-----Original Message-----
From: funkymcfly [mailto:danielpwillis@xxxx]
Sent: 04 May 2002 22:24
To: doc-uk@xxxxxxxxxxxxxxx
Subject: [doc] Speedo... bits


Hi all,

Okay, who knows what the part number is for the plastic cap that
drives the speedo is?

I'm refering to the round cap that "plugs" in to the hub on the
driver's side (LHD) of the front wheel. Mine is nicely rounded off
inside and won't drive the speedo at all... annoying.
I can't find it on any of the usual sites.. anyone able to help me?

Cheers,

Dan
Vin#5284 - Hana



DOC UK Website: www.delorean.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed
public and may be printed in the club magazine **

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/








Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated